Filter
Top Products
PERIODIC MAINTENANCE AND ADJUSTMENT
7-10
7
3. Take the front cowling off as
shown.
4. Remove the bolt, screw and quick
fastener, and then take the panel
off.
To install the panel
1. Place the panel in its original posi-
tion, and then install the bolt, screw
and quick fastener.
2. Place the front cowling in its origi-
nal position, and then install the
bolts and quick fasteners.
3. Install each headlight beam adjust-
ing knob by installing the screw.
4. Adjust the headlight beam if nec-
essary. (See page 4-35.)
Panels B and C
To remove a panel
1. Remove the seats. (See page
4-30.)
2. Remove the bolts and the quick
fastener screws.
1. Front cowling
2. Bolt
3. Quick fastener
2
2
1
3
1. Screw
2. Panel A
3. Bolt
4. Quick fastener
1
3
2
4
U1MC10E0.book Page 10 Monday, July 30, 2012 4:56 PM