Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
4-13
4
TIP
● 16 °F will be displayed even if the
ambient temperature falls below
16 °F.
● 122 °F will be displayed even if the
ambient temperature climbs above
122 °F.
● The accuracy of the temperature
reading may be affected when
riding slowly [approximately under
20 km/h (12.5 mi/h)] or when
stopped at traffic signals, railroad
crossings, etc.
Coolant temperature display:
The coolant temperature display indi-
cates the temperature of the coolant.
The coolant temperature varies with
changes in the weather and engine
load.
If the message “Hi” flashes, stop the ve-
hicle, then stop the engine, and let the
engine cool. (See page 7-40.)
TIP
The selected information display can-
not be switched while the message “Hi”
is flashing.
NOTICE
ECA10021
Do not continue to operate the en-
gine if it is overheating.
Average fuel consumption display:
The average fuel consumption display
modes “km/L”, “L/100km” or “MPG”
show the average fuel consumption
since the display was last reset.
● The “km/L” display shows the av-
erage distance that can be trav-
eled on 1.0 L of fuel.
● The “L/100km” display shows the
average amount of fuel necessary
to travel 100 km.
● The “MPG” display shows the av-
erage distance that can be trav-
eled on 1.0 US gal of fuel.
To reset the average fuel consumption
display, use the select switch to select
the information display that contains
the average fuel consumption display.
Push the “RESET” button briefly so that
the average fuel consumption display
flashes, and then push the “RESET”
button again for at least 2 seconds
while the display is flashing.
TIP
After resetting the average fuel con-
sumption display, “_ _._” will be shown
for that display until the vehicle has
traveled 1 km (0.6 mi).
Lo
C.TEMP ˚F
GEAR
4
Hi
C.TEMP ˚F
7.6
FUEL AVG MPG
U1MC10E0.book Page 13 Monday, July 30, 2012 4:56 PM