Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
4-15
4
Adjusting the temperature levels of the
grip warmer settings
1. Use the select switch to highlight
“Grip Warmer”.
2. Push the menu switch “MENU”.
The grip warmer setting display
will be shown and “High” will flash
in the display.
3. Push the menu switch “MENU”.
The temperature level for the high
setting will start flashing.
Use the select switch to set the
temperature level, and then push
the menu switch “MENU”. “High”
will start flashing.
4. Use the select switch to highlight
“Middle” or “Low”, and then
change the setting using the same
procedure that was used for the
high setting.
5. When you are finished changing
the settings, use the select switch
to highlight “ ”, and then push the
menu switch “MENU” to return to
the setting mode menu.
“Unit”
This function allows you to
switch the display units be-
tween kilometers and
miles. When kilometers are
selected, the fuel con-
sumption units can be
switched between
“L/100km” and “km/L”.
“Display”
This function allows you to
change the items shown in
3 information displays.
“Brightness”
This function allows you to
adjust the brightness of the
multi-function meter unit
panel to suit the outside
lighting conditions.
“Clock”
This function allows you to
set the clock.
“All Reset”
This function allows you to
reset all items, except the
odometer and the clock.
MENU
Grip Warmer
Maintenance
Time Trip
Unit
Display
Brightness
Clock
Grip Warmer
Hi
g
h
10
Middle
5
Low
1
Grip Warmer
Hi
g
h
10
Middle
5
Low
1
U1MC10E0.book Page 15 Monday, July 30, 2012 4:56 PM