Filter
Top Products
Points Of Interests Information
(Only available with the Whistler Map
™
software provided with
the Galileo Elite
™
or with the Galileo
™
GPS Accessory Pack)
1. Move Direction Button to a POI or road on the map.
2. Press MENU Button.
3. Select “Show MapInfo” and press the OK Button.
An Info screen will display the POI’s name, county,
country, distance from last known GPS location and
(if available) its phone number. See 18-A.
Note: The arrow must be on a road or POI, otherwise the
“Show MapInfo” option will be grayed out and not
available.
Measuring Distances
While displaying the Map Page you can measure the
mileage between points or multiple points. Up to five
“point to point” measurements can be made. The mileage
for point to point is shown on the screen.
To Measure Distances
1. From the Map Page, press the Menu Button.
2. With the Direction Button move to “Show Dist On”
option and press the OK Button. See 18-B.
3. Move the Direction Button to where you want to start
measuring from. Press the OK Button again “0 ft” will
be displayed. See 18-C.
4. Move the Direction Button to where you want to start
measuring to. As you move the Direction Button the
mileage (or Kilometers – if selected) is shown along with
a dotted line. See 18-D.
5. To measure another point, simply press the OK Button
and the total mileage for the first point is displayed and
a new measurement starts. See 18-D.
Points of
Interests
GALILEO
™
GPS
18
Points of Interests
18-A
18-B
18-C
18-D