Filter
Top Products
OPERATION
7
OPERATION
Memory/Beep Confirmation
All features selected (except Stay Alert and Quiet) are
retained in memory. Each time a button; is pressed one beep
confirms feature
“on”, two beeps confirm feature “off”.
Audio Level Adjustment
The audio levels can be adjusted high to low, or low to
high, in eight steps: (0) is no audio level, (7) the highest.
• Press and hold
P/V to increase audio level.
• Press and hold P/V to decrease audio level.
As audio level is adjusted, beeps are provided and the dis-
play indicates volume level. For example:
•
Press and hold
P/V and the volume will go to the max level (7),
then proceed to lower the volume to level (0). Continuing
to hold the
P/V button will repeat the volume steps above.
6
Auto Quiet Mode
Auto Quiet reduces the selected audio level to level (1)
approximately 5 seconds after a radar or safety radar sig-
nal is detected. The alert for any new signal within 20
seconds will resume at level (1). Auto Quiet does not affect
VG-2 or laser alerts.
• Press Quiet (before a signal is detected) to engage Auto
Quiet. Display shows:
• Once the Auto Quiet mode is engaged, you may cancel
the audio alarm by pressing
Quiet.
• Press
Quiet (when the unit is not alarming) to cancel
Auto Quiet mode.
Note: When Auto Quiet engages, it cancels the audio to
the optional Voice Module.
Quiet Mode
Quiet Mode cancels the audio during an alert and any new
alert within 20 seconds. After 20 seconds, approximately 2
beeps are provided on any new alert and unit then remains
quiet.
• Press
Quiet to cancel the audio.
• Press
Quiet a second time during an alert to restore the
standard audio alert pattern; or turn the unit off, then on.