Filter
Top Products
1.4 Using the touch pen
The touch pen (stylus) is your tool to communicate with P3.
1. Click:
Click on a menu on the screen with the tip of touch pen, to open the menu and
use the menu functions.
2. Drag:
First click one point on the map with the pen tip, then move the pen tip, to
move within the map and locate the map position you wish.
Note A touch pen with a damaged tip, a ball pen or any other edged and
rough object may cause scratches and damage of the LCD screen. Please
use an undamaged touch pen. Don't use a broken touch pen
1.5 Communicating with the computer
Connect to the computer via the MINI USB interface at the right side of the
GPS navigation device body. See the below figure for details:
System requirements:
-Windows 98SE, ME, 20000 and XP(Driver required for Windows 98SE)
-Windows 98SE, ME, 20000 and XP(Driver required for Windows 98SE)
-DVD Rom Drive(for map upgrade purposes)
-Intel PentiumII 233Mhz
-64MB RAM
-50MB available hard drive space
-256-color display adapter and monitor
(16 bit color required)
It allows files to be copied between the navigation device and the computer.
You can also back-up files from the GPS navigation device io the computer to
restore data to the GPS navigation device when necessary.
1. Please confirm that the GPS navigation device is in working condition
and MICROSOFT ACTIVESYENC software has been installed.
2. Connect the MINI USB of USB cable [ ] to the MINI USB port on
the left side of the GPS body, and the connect standard USB port
[ ] to the USB Host of computer;
3. After connecting to a computer, the device automatically recognizes
new hardware; the GPS navigation device suspends current running
programs and switches into the computer communication interface;
4. After communication is completed, remove the MINI USB cable. The GPS
navigation device continues to run the suspended programs.
Note Data Security: Please backup system data into external storage
devices before upgrading system data. Our company shall not be held
responsible for system data damage or loss.
Note During the connection between the GPS navigation device and
computer, the GPS navigation device will suspend other operations.
Note During the connection between the GPS navigation device and
computer, executing any of the following actions causes the system to
terminate communication with the computer and result loss of un-transmitted
data.:
1. Removing the MINI USB cable;
2. Pressing power button to turn off;
3. Using the reset button or battery switch to restart system;
4. Clicking the close button on the upper right corner of the window.
Chapter
Chapter