Filter
Top Products
18 General Information
Regulatory Compliance
Acts that constitute tampering with the Noise Shielding and Insulation
Devices:
Removing or rendering inoperative the engine and/or transmission noise
deadening panels, shields or insulating materials.
Removing or rendering inoperative the cab-tunnel or hood noise insulating
materials.
Removing or rendering inoperative any vehicle body mounted sound
insulation components and/or shields (cab or fender shields, skirts, wheel
housing splash shields, etc.).
Cooling System
DO NOT work near the fan with the engine running or the ignition in the
ON position. The engine fan can engage at any time without warning.
Anyone near the fan when it turns on could be seriously injured.
Maintenance
Visually inspect cooling system components for damage, and/or
misalignment.
Primary system components requiring noise related inspection include fan
blades, fan clutch, fan shroud, fan ring, and recirculation shields. Check fan
blades, fan ring, fan shroud, belt tensioner and recirculation shields for any
damage. Verify that fan blades clear the fan ring. Inspect all related fasteners,
brackets, and clamps for damage and tightness. Confirm operation of
temperature modulated fan clutch.
Regulatory Compliance
Acts that constitute tampering with the Cooling System:
Removing or rendering inoperative cooling system components (such as the
temperature modulated fan clutch, fan shroud, fan ring, recirculation shields,
etc.).
USA22978.bk.book Page 18 Wednesday, July 9, 2008 9:09 AM