Filter
Top Products
1993 Volvo 850 GLT
Clean the contact surfaces on the wheel and hub. Lift the wheel and place it on the hub. Make sure that
you align the wheel with the guide stud on the wheel hub prior to installation. Install the wheel bolts
cross-wise and tighten by turning lightly clockwise. Lower the vehicle to the ground and alternately
tighten the bolts to 81 ft. lbs. (110 Nm). Install the wheel cap.
CAUTION: Correct tightening torque on wheel bolts must be
observed.
WARNING!
● The jack attachment must engage the bar in the jack attachment ( A ). The car's weight must not rest
on the jack's attachment ( B ).
● Be sure the jack is on firm and level ground.
● Never allow any part of your body to be extended under a car supported by a jack.
● Use the jack intended for the car when replacing a wheel. For any other job, use stands to support
the end of the car being worked on.
● Apply the parking brake, select position P (automatic transmission) or Reverse gear (manual
transmission).
● Block the wheels standing on the ground, use rigid wooden blocks or large stones.
● The jack should be kept well-greased.
pg. 6:4 Spare tire
Temporary Spare
The spare tire in your car is what is called a "Temporary Spare". It has the following designation:
T115/70 R 15.
Recommended tire pressure (see decal on fuel filler flap) should be maintained irrespective of which
file:///K|/ownersdocs/1993/1993_850GLT/93850_6_1.html (3 of 4)12/30/2006 9:43:05 AM