Volkswagen New Beetle
1.8 Liter 4-Cyl. 5V Turbo OBD II Engine Mechanical
Engine, removing and installing (Page 10-3)
Removal notes
- First check whether a coded radio is fitted. If this is the case obtain the anti - theft
coding.
The engine is removed downward together with the gearbox.
- With ignition switched off, disconnect battery Ground strap.
All cable ties which are opened or cut open when removing engine must be replaced in
the same position when installing engine.
- Remove engine cover.
- Remove air cleaner:
Repair Manual, 1.8 Liter 4 - Cyl. 5V Turbo OBDII Fuel Injection & Ignition, Repair
Group 24
- Remove intake hose between air mass meter (G70) and throttle valve control part
(J338).
Repair Manual, 1.8 Liter 4 - Cyl. 5V Turbo OBDII Fuel Injection & Ignition, Repair
Group 24
- Remove power steering fluid reservoir from battery holder without disconnecting
hoses.