Filter
Top Products
Volkswagen New Beetle
1.8 Liter 4-Cyl. 5V Turbo OBD II Engine Mechanical
Engine, removing and installing (Page 10-12)
Securing engine to assembly stand
When working on the engine, it should be secured to the assembly stand support clamp
VW 313 using the engine and gearbox bracket VW 540.
Work sequence
- Move engine/transmission with V.A.G 1383 A lift to a workbench.
- Lower engine/transmission unit so that the transmission is supported (at supporting
point).
- Remove gearbox.