Filter
Top Products
24
©
2006
Directed Electronics, Inc.
To select another menu:
1. Press and HOLD the Valet/Program button.
2. After three seconds, the unit will advance to the next menu and the siren will chirp, indicating
which menu has been accessed.
For instance, if you just programmed some features in Menu #1 (Basic Features) and you wish to
program a feature in Menu #2, you press and HOLD the Valet/Program button. After 3-seconds,
the siren chirps twice indicating access to Menu #2. To advance to Menu #3, continue to HOLD
the Valet/Program button an additional 3-seconds until the siren chirps three times indicating access
to Menu #3.
To exit the learn routine do one of the following:
➤➤
Close the open door.
➤➤
Turn the ignition on.
➤➤
No activity for longer than 15 seconds.
➤➤
Press the Valet/Program button too many times.
System Features Menus
Menu #1 - Basic Features
Items in bold text have been programmed to the default setting at the factory.
Note: For feature number 1-7, the 3.5 second door lock pulse setting the siren will chirp twice, the
0.4 second door lock pulse setting the siren will chirp three times.
Feature One Chirp Two-Chirp
Number Setting Setting
1-1 Active arming Passive arming
1-2 Chirps ON Chirps OFF
1-3 Ignition controlled door locks ON Ignition controlled door locks OFF
1-4 Ignition controlled door unlock ON Ignition controlled door unlock OFF
1-5 Active locking Passive locking
1-6 Panic with ignition on No panic with ignition on
1-7* 0.8 second door lock pulses 3.5 second door lock pulses/0.4 sec.
1-8 Forced passive arming ON Forced passive arming OFF
1-9 Automatic Engine Disable ON Automatic Engine Disable OFF
1-10 Vehicle Recovery System (VRS
®
) ON (VRS
®
) OFF
1-11 Code Hopping
®
on Code Hopping
®
off