Filter
Top Products
20
© 2005 directed electronics, inc.
out of range notification
If a command is issued from the remote, but the remote is set to
the incorrect vehicle or is beyond the range of the vehicle to
receive the command, the remote responds with 3 set of 2 quick
beeps and the icon will flash 3-times.
pprrooggrraammmmiinngg LLCCDD rreemmoottee
To enter programming mode
Press and hold the button until one long beep is heard.
Programming mode to customise the remote’s response is now
entered.
Beeps/Vibration On/Off
Press to select beeps/vibration On/Off. Beeps alone, or
vibration alone, or beeps and vibration, or no beeps or vibration
can be selected. Refer to the table below for these settings.
➜
nnoottee::
If no buttons are pressed within 5-seconds, pro-
gramming mode will exit with 2-beeps.
P
➜
➜