Filter
Top Products
22
©
1999 Directed Electronics, Inc.
■ Full trigger response 30 or 60 seconds: This determines how
long the full triggered sequence lasts. Some states have laws
regulating how long a security system can sound before it is
considered a nuisance. If your installer is programming the secu-
rity system with the DEI Bitwriter or a personal computer and
the TechSoft Programmer, the full triggered response can be
programmed for any duration ranging from 1 to 180 seconds.
■ Nuisance Prevention
®
Circuitry on or off: Please refer to the
NPC
™
section of this manual for a complete explanation of
how NPC
™
operates. If NPC is programmed off, the security
system will respond to inputs from any sensor indefinitely.
NOTE: Because many states have laws regulating security systems, pro-
gramming NPC off may cause your system to violate state laws.
■ Progressive door trigger on or off: When the system is armed
and a door is opened, the system responds with ten chirps
prior to beginning the full triggered sequence. If an instant
trigger is desired, the progressive door trigger can be pro-
grammed off.
■ Valet pulse count: The number of presses of the Valet
®
switch
required to disarm the security system or the VRS
®
system can
be programmed from 1-5 presses. The default setting is one
press.
■ Siren tones and chirp volume: The output of the Revenger
®
Soft Chirp
®
siren consists of six different tones in sequence.
Any of these tones can be eliminated by your dealer, result-
ing in a unique, easily identifiable siren sound. The siren
chirps can be either full volume or 6 decibels quieter than
the full alarm blast.