Filter
Top Products
16
©
1999 Directed Electronics, Inc.
The zone number is the number of LED flashes used by the system
to identify a specific input. The standard input assignments are
listed below, along with spaces to write in any optional sensors or
switches you have had installed.
ZONE
(Number of DEALER-INSTALLED
LED Flashes) DESCRIPTION OPTIONS
1
Instant trigger - often used
for hood/trunk pinswitches
2 Instant trigger - a heavier impact
detected by the Double Guard
®
Shock Sensor
3 Door switch trigger
4 Instant trigger - for optional
sensors
5 Ignition trigger
If the Warn Away
®
response is triggered, the LED will not report it.
NOTE: Your system stores the last two triggered zones in memory. If your
system has been triggered but the LED has been reset by turning on the
ignition, your dealer can still recall the last two zones that were trig-
gered. Contact your dealer for details.
Table of Zones