Filter
Top Products
1
59
OPERATION
Driving Safely
Driving Through Water
Your ATV can operate through water
with a maximum recommended
depth equal to the bottom of
the footrests (1). Follow
these procedures when
operating through water:
1. Determine water depths
and current before
crossing.
2. Choose a crossing where
both banks have gradual inclines.
3. Proceed slow ly, avoiding rocks and obstacles if possible.
4. After crossing, dry the brakes by applying light pressure to the
lever until braking action is normal.
After running the vehicle in water, it’s critical to have it serviced as
outlined in the maintenance chart. See page 64. The following areas
need special attention: engine oil, transmission oil, front and rear
gearcases, and all grease fittings.
CAUTION
Major engine damage can result if the vehicle is not thoroughly
inspecte d after operation in water. Perform th e services outlined
in the maintenance chart.
If your vehicle becomes immersed or is operated in water that
exceeds th e footrest leve l, take it to your dealer for service before
starting the engine.
NOTE: Avoid operating the vehicle through deep or fast-flowing
water. If you cannot avoid water that exceeds the
recomm ended ma ximum depth, go slowly, balance your
weight carefully, avoid sudden movements, and ma intain a
slow and steady fo rward motion. Do not make sudden turn s
or stops , and do not make sudden throttle changes.
If your vehicle becomes immersed, and it’s impossible to take it t o a
dealer before starting it, follow the steps described on page 90. Have
the vehicle serviced by your dealer at the first opportunity.