Univex 2008 Frontier Automobile User Manual


 
Unfastening the seat belts
1
Tounfasten the seat belt,press the button on
the buckle. The seat belt automatically re-
tracts.
Checking seat belt operation
Seat belt retractors are designed to lock seat belt
movement by two separate methods:
When the seat belt is pulled quickly from the
retractor.
When the vehicle slows down rapidly.
To increase your confidence in the seat belts,
check the operation as follows.
Grasp the shoulder belt and pull forward
quickly. The retractor should lock and re-
strict further belt movement.
If the retractor does not lock during this check or
if you have any questions about seat belt opera-
tion, see a NISSAN dealer.
Shoulder belt height adjustment (Front
seats)
The shoulder belt anchor height should be ad-
justed to the position best for you. (See “Precau-
tions on seat belt usage” earlier in this section.)
To adjust, pull out the adjustment button
1
and
move the shoulder belt anchor to the desired
position
2
, so the belt passes over the center of
the shoulder. The belt should be away from your
face and neck, but not falling off your shoulder.
Release the adjustment button to lock the shoul-
der belt anchor into position.
WRS0139 LRS0242
Safety—Seats, seat belts and supplemental restraint system 1-19
REVIEW COPY—
2008 08+ Truck/Frontier (fro)
Owners Manual—USA_English (nna)
06/30/07—debbie