Univex 2008 Frontier Automobile User Manual


 
CAUTION
Be careful not to allow children to swallow
the battery and removed parts.
Replace the battery in the keyfob as follows:
1
Open the lid using a coin
A
.
2
Remove the battery
B
.
3
Install a new battery
C
with the “+” facing
down.
Recommended battery: CR2025 or equivalent.
4
Close the lid securely.
5. Press the
button, then the
button two or three times to check the key-
fob operation.
If the battery is removed for any reason
other than replacement, perform step 5.
An improperly disposed battery can
hurt the environment. Always confirm
local regulations for battery disposal.
The keyfob is water-resistant; how-
ever, if it does get wet, immediately
wipe completely dry.
The operational range of the keyfob
extends to approximately 33 ft (10 m)
from the vehicle. This range may vary
with conditions.
FCC Notice:
Changes or modifications not expressly ap-
proved by the party responsible for compli-
ance could void the user’s authority to op-
erate the equipment.
LDI0484
KEYFOB BATTERY REPLACEMENT
Maintenance and do-it-yourself 8-27
REVIEW COPY—
2008 08+ Truck/Frontier (fro)
Owners Manual—USA_English (nna)
06/30/07—debbie