Filter
Top Products
I
'-.,
~ee..
~~
- ~
-
MEMORY DIALLING
You can store up to 10 telephone numbers into memory .
Each telephone number can be up to 30 digits long.
STORING A TELEPHONE NUMBER INTO
MEMORY
To store a number into memory. do the following:
. Press [ST] key. Note that the LCD Display is flashing.
(as shown) ..,~::.
"..,..
. Enter the desired telephone number with the appropriate
STD and IDD Area Codes.
.Press [ST] Key again.
.Enter the desired Memory location (choose from 0 to 9).
A confirmation BEEP will sound and the LCD Display
stops flashing.
ERASING A STORED TELEPHONE NUMBER
.Press [ST] key. Note that the LCD Display is flashing.
.Press [CL] key.
. Press [ST] key and the memory location number (0 to
9). A confirmation BEEP will sound and the LCD
Display stops flashing.
Note: WhilstSTORING and ERASING a telephone
number:
-Ifyou entered the wrong sequence. an error tone
willsound and the programming mode willend.
- Ifyou have not keyed any digit within 30 seconds,
an error tone willsound and the programming
mode willend.
RECALLINGTHESTORED TELEPHONE
NUMBER
.Press [RC] Key.
.Press the required memory location (0 to 9) desired.
. Press Asterisk [*] Key. Your Seaphone ID and the
stored telephone number will automaticallybe transmit-
ted.
Note: When the memory locationis notentered an error
tone willsound and RECALL mode willend.
Should you wish to discontinue memory recall
dialling,just press [CL] Key.
---
Page 19
r-
HH979XL
J
--- _h_~--