Filter
Top Products
9
6. OPERATION
1
Referring to the item " 5. CONNECTION", connect each equipment correctly.
2
Turn on the connected equipment and the camera.
3
Pointing the lens at the object, operate the lens iris adjustment, focus adjustment, etc..
4
Referring to the item "6.1 White Balance", operate the adjustment.
5
Referring to the items "6.2 Gain, 7. MODE SETTING BY ON SCREEN DISPLAY", select the necessary
items.
6. 1 White Balance
For the white balance adjustment for this unit, AWB (Automatic White Balance) and MANU (Manual white
balance) adjustments are provided. Referring to the items "7.2 (3) WHT BAL (White balance), 7. MODE SET-
TING BY ON SCREEN DISPLAY", select the desired mode.
1
AWB (Automatic white balance)
• Set the MODE to AWB on the WHT BAL menu.
Perform the C.TEMP (color temperature conversion) setting, if necessary.
(Refer to the item "7.2 (3) WHT BAL (White balance)".)
3200K : Appropriate for indoor shooting.
5600K : Appropriate for outdoor shooting.
• If the index menu/menu is displayed, press the [DISP] button to disable the character display on the
menu.
• Shoot a known white object that fills the screen and push [DATA UP] button for approx. 1 second.
• The character AWB blinks on the screen when the AWB starts.
• The character AWB stops blinking when the AWB finishes, and the result is displayed for approx. 1
second.
AWB
(Automatic White Balance)
Adjust white balance by shooting the white
object inside the area set by AWB menu
and pressing the [DATA UP] button.
When the shutter mode is E.TRG, AWB is
not available.
MANU
(Manual White Balance)
Adjust the white balance manually using
the WHT BAL menu while shooting the
white object.
Adjustment is performed by confirming
with a waveform monitor.
Outline
Notes
Meaning
Automatic white balance adjustment finished correctly.
Automatic white balance adjustment cannot be performed because the
video level is too low.
Set the video level properly.
Automatic white balance adjustment cannot be performed because the
video level is too high.
Set the video level properly.
Automatic white balance adjustment cannot be performed because the
color temperature is too low.
If the C.TEMP is set to 5600K, set to 3200K.
If the message appears with the C.TEMP set to 3200K, change the
illumination or use a color temperature conversion filter.
Automatic white balance adjustment cannot be performed because the
color temperature is too high.
If the C.TEMP is set to 3200K, set to 5600K.
If the message appears with the C.TEMP set to 5600K, change the
illumination or use the color temperature conversion filter.
Result displayed
AWB OK
AWB NG LEVEL
LOW
AWB NG
LEVEL HIGH
AWB NG
C. TEMP HIGH
AWB NG
C. TEMP HIGH
2004.04.05, 8:51 AMPage 9