TomTom 4EJ41 GPS Receiver User Manual


 
16
If the command is incorrect, say, "No" and repeat the command after you hear the tone.
Your GO plans a route from your current location to your Home address.
Tip: To stop your GO from listening out for further commands, say "Back" or "Cancel" or
"Quit" or simply tap the screen.
Planning a journey using your voice
Important: In the interest of safety and to reduce distractions while you are driving, you
should always plan a route before you start driving.
Note: It’s not possible to plan a route using your voice for all maps in all countries, or in
all languages.
To plan a route to an address using speech, do the following:
1. Tap the voice control button in the Driving view.
2. When you hear the tone, say, "Navigate to address".
3. Say the name of the town.
Your GO shows a list of towns which sound similar to what you said and
tells you which town is at the top of the list.
If the town you hear is the same as the town you requested then say, "Done" or "OK" or
"Yes" or "One" or tap the town at the top of the list.
If the town you hear is incorrect, but the correct town is in the list, say the number next
to the correct town or tap the name of the town.
For example, if the correct city is Paris and this town is shown at the third item in the
list, you can say, "Three" or tap the name, Paris.
If the name is not in the list, then say "Back" or "No" or tap Back to return to the previous
screen and say the town again when you hear the tone.
4. Say the streetname.
Your GO shows a list of streetnames which sound similar to what you said and tells you
which streetname is at the top of the list.
If the streetname you hear is the same as the streetname you requested then say,
"Done" or "OK" or "Yes" or "One" or tap the streetname at the top of the list.