Filter
Top Products
12
The first steps
13
via the menu to a phone whose number is stored in the internal pho-
ne book of the Twin-Phone.
In the SIM card profile or SAP profile, you can also establish a con-
nection to the phone whose number is stored in the external phone
book. In the external phone book, only entries stored on your SIM
card can be used.
Or simply enable the voice-dial function by pressing and holding the call
answering key. You are then prompted to say a record (only possible if
a record was previously stored in the internal phone book).
10. Answering a call
If your phone shows an incoming call, a symbolised telephone receiver
icon will be displayed on the Twin-Phone. When the SIM card was inser-
ted or if in SAP profile, only the ring tone set for the Twin-Phone will
sound; the same applies to SMS. In the HF profile, the ring tone of
both the Twin-Phone and the mobile phone will sound in case of an in-
coming call.
If there is an entry for the respective caller in the internal or external
phone book, the saved name will be displayed (in HF profile, no
entry will be displayed if stored in the external phone book).
Answer the call by pressing the call answering key; press the call termi-
nation key to end or reject a call.
The number of missed calls will be displayed in the top right corner.
Details on the missed calls are shown in the main menu Call registers,
Missed calls.
The same applies to received SMS. These will be indicated by a small
icon in the form of a closed envelope. To read the message, select the
main menu SMS and then Inbox.
Menu navigation
11. Main menu
In order to open the main menu when the screen saver is active, always
press the SWRC shift key.
In the main menu, the display will show six menu items: Phone book,
Call registers, SMS, BT connections, BT profiles, Setup, which
you can access using the SWRC scroll keys 2, 4, 6 and 8.
In order to quit a menu, press either the call answering key, the call
termination key or the OK key depending on the submenu structure.
Please note that not every menu in every profile may be active. Please
refer to the chapter BT profile for more details.
12. Bluetooth profiles
In the BT profile menu’s submenu, you can choose from four opera-
ting profiles, which represent different ways of establishing a connec-
tion to your mobile phone. You can access the submenu by pressing the
OK key. Then, the SIM card, SAP, Hands-free and Auto profiles
are displayed.
Find the required operating mode using the scroll keys 2 and 8 and then
select it by pressing the OK key. Confirm the selected profile by pres-
sing the call termination key. The enabled operating profile will then be
displayed in the top left corner on the screen saver.
The last active profile, for example the symbol for the SAP profile, will
flash in the top left corner of the display after the phone was switched
on. If you do not change the SAP profile, the Twin-Phone will, each
time it is restarted, automatically attempt to establish a connection to
the mobile phone it last communicated with.
If you wish to change the profile, press the shift key, open the menu BT
profiles, choose the required profile and confirm with the call termina-
tion key. When a new BT profile is selected, no automatic connection
between the Twin-Phone and the mobile phone will be established. This
must be established via the menu BT connections. You may skip to
this chapter now if you want to read the descriptions of the individual
BT profiles at a later time.