Filter
Top Products
10
11
keys 2, 4, 6 and 8.
If you want to enter another letter after having shifted the cursor, press
the shift key in order to enable the number keys again. The icon in the
left bottom corner will now show the number keys.
At the bottom of the display (centre), you can see whether capital let-
ters (ABC) or lower case (Abc and/or abc) is enabled. If ‘Abc’ is display-
ed, the first word of each sentence will begin with a capital letter. The
other letters and words will automatically be displayed in lower case. If
you only want to use capital letters, press the hash key once or press
this key twice for lower case.
In the right bottom corner and above the line, the number of characters
already entered is displayed, and below the line, how many characters
you may still type in. When entering names in the internal or exter-
nal phone book, you may enter up to 50 characters. When writing an
SMS, you may use a maximum of 160 characters.
Space characters can be entered by pressing the 0 key. If you press the
0 key repeatedly 2 to 17 times, you can enter one of the following cha-
racters in the order given: 0 % ( ) + - * / ^ = < > [ ] { }.
Dots can be entered by pressing the 1 key. You can also enter the fol-
lowing (punctuation marks) characters in the order given by pressing
this key repeatedly: . , ! ? 1 ’ : ; - / “ _ .
For entering the special characters & @ # € £ $ ¥ xx ~ § \ | ¡ ¿, press
the star key once and/or 2 to 14 times repeatedly.
The first steps
8. First use
When the device is switched on, the illuminated display will first show
‘BURY TECHNOLOGIES’ and then read Waiting for SIM card activa-
tion. You may also have to enter your PIN. If no SIM card was inserted,
the display will read SIM card missing for a moment until the screen
saver is activated. Press the shift key in order to access the main
menu
The screen saver comprises the following information: in the top left
corner the icon for the SIM card is shown - when Default is set (re-
gardless whether a SIM card was inserted or not). In the top right
corner, the symbol for the antenna is displayed, with two to three hori-
zontal bars showing the quality of reception. In the middle of the dis-
play, the time and date is displayed.
The display will remain illuminated for approx. 60 seconds. After this
time, the light will switch off if you do not use the phone, and the pho-
ne will automatically switch to standby mode.
By default, the device is set so that users are able to use the phone
immediately for calls once the SIM card is inserted into the Twin-Phone.
This means that the SIM card BT profile is already activated. Please
refer to the chapter BT profile for information on the operating profile
of SIM card as well as the SAP, HFP and Auto profiles.
In order to be able to make calls when in other profiles, select the re-
quired profile in the BT profile submenu. Then select the item BT
connections to pair your mobile phone with the Twin-Phone from the-
re. Please refer to the chapters following the section “The first steps”
for more detailed information.
9. Making a call
When the Twin-Phone is switched on, e.g. with inserted SIM card, you
can make a call by entering the phone number using the number keys
and then establish a connection by pressing the call answering key.
Or simply press the call answering key once when the screen saver is
shown in order to open the list of the last Dialled numbers. If you
now press the call answering key once, a connection is established to
phone the last dialled number. When the phone is used for the first
time, the Call registers are empty.
In all BT profiles, you also have the option to establish a connection