Subaru H7110LS200 Automobile Alarm User Manual


 
1
INSTALLATION
INSTRUCTIONS
SECURITY SYSTEM
UPGRADE
LEGACY
P/N: H7110LS200
Kit Contents:
1 Security Control Module w/Integral Bracket
1 Starter Interrupt/Horn Relays w/Integral Bracket
1 Horn w/Integral Bracket
1 Security Radio Mounting Bracket
2 Pan Head Screws (M5×8mm)
2 M6 Nuts
2 Window Decals
1 Installation Manual
Tools Required:
#1 Flat-tip Screwdriver
#2 Phillips Head Screwdriver
Electrical Tape
1/4” Drive Ratchet
10-inch 1/4” Drive Extension
10mm Socket
This device complies with FCC rules part 15. Operation is
subject to the following two conditions: (1) this device may
not cause harmful interference and (2) this device must
accept any interference that may cause undesired operation.
NOTE: This system requires prior installation of Keyless Entry
System. If installing both systems at the same time, install the
Keyless Entry System first.
00.08
UT28L-11
Printed in Japan
39412/SUBARU (P.01-09) 8/1/00 5:39 PM Page 1