Subaru 2001 Outback Automobile User Manual


 
5-24 Audio
second or longer (type A audio) or press
the RDM button (type B audio).
. For type A audio, press the RPT/RDM
button for 0.5 second or longer.
. For type B audio, press the RDM
button.
Each time you press the button, the mode
changes in the following sequences.
Type A audio:
Type B audio:
NOTE
. The RDM indication refers to the
random playback of the tracks. It
randomly repeats the tracks on the
CD. It is possible to select the function
when formats other than the MP3/WMA/
AAC format CD is playing.
. The FOLDER RDM indication re-
fers to the random playback in the
folder. It randomly repeats the tracks in
the folder. It is possible to select the
function when an MP3/WMA/AAC for-
mat track is playing.
. The DISC RDMindication refers to
the random playback of a disc. It
randomly repeats the tracks in the CD.
It is possible to select the function
when an MP3/WMA/AAC format track is
playing.
To cancel the random playback mode,
press the RPT/RDM button for 0.5
second or longer again (type A audio) or
press the RPT button again (type B
audio) and select CANCEL.
The RDM indication will turn off, and the
normal playback mode will be resumed.
NOTE
Random playback will be cancelled if
you perform any of the following steps:
. Press the RPT/RDM button for 0.5
second or longer and select CANCEL
(type A audio)
. Press the RPT button and select
CANCEL (type B audio)
. Press the
button
. Press the disc select button
. Press the SCAN button
. P ress the LOAD button when
there is free space in the CD magazine
. Press the
or side of the
FOLDER button
& Scan
The scan mode lets you listen to the first
10 seconds of each track/file in succes-
sion. Press the SCAN button to start
scanning upward beginning with the track/
file(s) following the currently selected one.
After all track/file(s) in the disk/folder have
been scanned, normal playback will be
resumed. To cancel the scan mode, press
the SCAN button again.
NOTE
The scan mode will be cancelled if you
perform any of the following steps.
. Press the RPT button
. Press the RDM button