Filter
Top Products
1.4. For the op er at ing safety of the equip ment
·
Never change set tings if the con se quences are not pre cisely known.
·
Use only orig i nal Ster ling spare parts.
·
Please ob serve the main te nance sched ule.
·
Keep re cord of all main te nance and re pair work.
·
Please note that elec tronic com po nents may be dam aged by static dis charge.
·
Check all elec tri cal con nec tions for proper fit be fore the equip ment is taken into
op er a tion for the first time and at reg u lar in ter vals.
·
Never ad just sen sors with out ex act knowl edge of their func tion.
·
Please note that the am bi ent tem per a ture must not ex ceed 70 °C (158°F).
·
The safety fil ter may only be used to gether with a con vey ing sys tem.
·
The safety fil ter re quires a com pressed-air sup ply (max. 5-6 bar (72-87 PSI) sys -
tem overpressure).
·
Never set a higher op er at ing pres sure than 6 bar (87 PSI) for the safety fil ter (sys -
tem overpressure).
·
In stall the safety fil ter in the suc tion line right in front of the vac uum gen er a tor.
·
Ob serve that the fil ter clean ing pro ce dure is car ried out while the vac uum gen er a -
tor is run ning.
·
Ob serve the op er at ing in struc tions of the con vey ing sys tem.
a536-3MS
SFC-A
Safety in struc tions 12