Sony XNV770BT GPS Receiver User Manual


 
47
Bluetooth settings
The Bluetooth settings can be configured in “BT
Menu.”
1 Select the Bluetooth source.
To select Bluetooth Phone, press (TOP), then
touch “BT Phone” in the top menu.
To select Bluetooth Audio, touch “Source
List,” then “BT Audio.”
2 Touch “BT Menu.”
In the case of Bluetooth Audio, touch “Play
Menu,” then “BT Menu.”
The Bluetooth setting menu appears.
3 Touch the desired item in the list and
configure the setting.
The items in the Bluetooth setting menu are as
follows:
*1 Cannot be configured during a handsfree call.
*2 Depending on the cellular phone, this unit’s
ringtone may be output even if set to “Cellular.”
Note
For details on the setting of other Bluetooth devices,
refer to their respective manuals.
“Signal”*
1
Activates the Bluetooth signal: “ON,” “OFF.”
“Discoverable”*
1
(page 39)
Allows the other Bluetooth device to search for
this unit: “Show,” “Hide.”
“Device Name”*
1
Changes the name of this unit displayed on the
connected device. (Default setting: “Sony
Automotive”)
For details on basic operation of the keyboard,
see “About the keyboard to edit the name” on
page 45.
“Search”*
1
(page 38)
Searches for connectable Bluetooth devices.
“Device List”*
1
(page 40)
Displays the list of registered devices; connects
to a registered device; deletes all registrations.
“Auto Answer”*
1
Answers an incoming call automatically.
–“Short”: to answer automatically after 3
seconds.
–“Long”: to answer automatically after 10
seconds.
–“OFF”: to not answer automatically.
“Ringtone”*
1
*
2
Uses the ringtone of this unit or the connected
cellular phone: “Default,” “Cellular.”
“EC/NC Mode” (Echo Canceller/Noise
Canceller Mode)
Reduces echo and noise during a call.
For normal use, set to “Mode 1.”
If the outgoing sound quality is unsatisfactory,
set to “Mode 2” or “OFF.”
“MIC Gain” (page 42)
Adjust the microphone volume for the other
party: –2 ~ +2.
“Initialize”*
1
Initializes all Bluetooth-related settings. Touch
“Yes” to confirm.