Filter
Top Products
10
POI search
POI (Points Of Interest) search allows you to set
facilities such as restaurants, hotels, gas stations,
etc., as the destination.
The system searches for POIs near the current
position.
To search for the POIs in another city
You can specify the city before selecting the POI
search method.
In this case, the system searches for POIs in the
city center.
1 In the menu display, touch , then “Find
a Place.”
The search method selection display appears.
2 Select “Change City.”
3 Enter the city name.
4 Select the desired city in the list.
To switch back to the nearby search, select
“Nearby.”
By POI name
You can search for a route to a POI by directly
entering its name.
1 In the menu display, touch , then
“Find a Place.”
The search method selection display appears.
2 Select “Points of Interest.”
3 Select “By Name.”
The POI name input display appears.
4 Enter the POI name.
The list of POI candidates appears in order of
distance from the current position.
5 Select the desired POI.
The POI confirmation display appears.
6 Select “Calculate Route.”
The route is calculated, and route guidance
starts.
Tip
If there are too many POI candidates in the list after
step 4 above, you can narrow down by selecting
category(ies). Select “Category” to show the category
list, then select the desired category(ies).
By POI category
You can search for a route to a POI by selecting
its category(ies).
1 In the menu display, touch , then
“Find a Place.”
The search method selection display appears.
2 Select “Points of Interest.”
3 Select “Category.”
The list of category candidates appears.
4 Select the desired category.
Select sub category when necessary until the
POI candidates are narrowed down.
The list of candidates appears in order of
distance from the current position.
5 Select the desired POI.
The POI confirmation display appears.
6 Select “Calculate Route.”
The route is calculated, and route guidance
starts.
Tip
If there are too many POI candidates in the list after
step 4 above, you can narrow down by entering the
POI name. Select “Name” to show the POI name input
display, then enter the POI name.