Filter
Top Products
User's manual Sony Personal Navigation System
Configuring the Sony Personal Navigation System - 83 -
Time zone
Calculation of arrival
times
On the TIME ZONE screen, select the time zone of the region you
are currently staying in. This is necessary for the system to
indicate correct times of arrival in navigation mode.
Element Signification
Time zone
Tap this entry field to select the time zone
of the region you are currently staying in.
Daylight saving
time
Tap this entry field to switch between
daylight saving time (yes) and standard
time (no).
Note: If there is a clock change or if you are traveling into
another time zone, you will have to adjust the respective setting.
Refer to chapter "
Basic settings" on page 23 for more
information.
Format
Units On the FORMAT screen, determine which units are to be used for
time and distance indications.
Setting Signification
Time
Tap the Time field to toggle between
12 hours (AM/PM) and 24 hours time
format.
Distance
Tap the Distance field to toggle between
kilometers or miles distance units.
Select language
Select language In the SELECT LANGUAGE screen you can set in which language
you would like to have the user interface for the software and the
spoken driving instructions.
The software restarts when you change the language.
You can use the Installer tool (on the software DVD) to set
which languages are available.
Use the ActiveSync
®
to connect the navigation device to your
computer and then insert the DVD.
The Installer tool starts automatically. Then follow the on-
screen instructions.