Filter
Top Products
. .
..
722
OPERATION
G. ACTIVE ARMING LOCK AND ARM:
1. Press the
button on the transmitter.
2. The siren will chirp (1) time and the parking lights will flash (1) time
indicating that the system is now Armed. The vehicles doors will lock
upon arming.
System Arm Door Ajar Trunk/Hood Ajar
Clear The Flash Icon:
Pressing the F button
3 times within 3 seconds
will clear the flash icon
on the LCD screen
transmitter.
AJAR WARNING: If the siren chirps (3) times, you have left a door,
trunk, or hood lid ajar. (See Alarm Feature I-3 Programming.)
SILENT ARMING / DISARMING: Pressing the transmitters
and
buttons at the same time will arm or disarm your security system.. No
chirping sound will be heard and the arm / disarm confirmation will be
visiblelwith the parking lights only.
SHOCK SENSOR BY-PASS: Pressing the
button on the transmitter (2)
times within 3 seconds will arm the security system and by-pass the
shock sensor. The system will chirp one additional time to confirm the
sensor bypass mode was activated. The sensor bypass feature is programmed
to activate for (1) arming cycle only. The security system will return to
normal operation during the next arming cycle.
NOISELESS MODE: Press the
button (1) time to arm the system..
Press the button (2) more times within 3 seconds: The siren will chirp
(1) more time. The system is now in Noiseless Mode. In Noiseless
mode the zone 4 shock sensor timer will be reduced from 30 seconds to
15 seconds. The noiseless feature is programmed to activate for (1) arming
cycle only. The security system will return to normal operation during the
next arming cycle.
LCD REMOTE CONTROL TRANSCEIVER
D. TIMER SETTING CHART:
Transceiver Press
Button Description Transceiver Button
1 Press and hold the Timer Setting (Hour) for and for +
F
button for 3 sec. *Flash digit for adjusting
Press the
F
button once Time setting (Minute) for and for +
*Flash digit for adjusting
2 Press the
F
button once. Alert Alarm for and or +
Time Setting (Hour)
*Flash digit for adjusting
Press the
F
button once Alert Alarm for and for +
Time Setting (Minute)
*Flash digit for adjusting
Press the
F
button once Alert Alarm Setting ON/OFF for OFFand for ON
3 Press the
F
button once Count Down for and for +
Timer Setting (Hour)
*Flash digit for adjusting
(Max.19 hours 59 minutes)
Press the
F
button once Count down Timer Setting for and for +
(Minute)
*Flash digit for adjusting
Press the
F
button once Count down Timer for OFFand for ON
Setting ON/OFF
EXIT: Press and hold the F button for 2 seconds or leave it for 10 seconds
and the system will automatically exit the programming mode.