Filter
Top Products
. .
..
1118
OPERATION
3. Within 15 seconds of the last digit code enter, turn the
Ignition switch from Off to ON.
4. Within 15 seconds, press and release the valet/program switch 3
times.
5. Turn the ignition switch to the Off position. [4] Chirps from the siren
or horn and [3] flashes from parking lights will indicate the system was
disarmed.
K. VALET MODE: (Disarm or Valet mode)
The valet/program switch allows you to temporarily bypass all alarm
functions, eliminating the need to hand your transmitter to parking
attendants or garage mechanics. When the system is in valet mode, all
alarm functions and remote starter functions are bypassed, however the
remote panic feature and remote door locks will remain operational. To use
the valet mode, the system must first be disarmed either by using you
remote transmitter, or by operating the manual override sequence.
To Enter Valet Mode:
1. With the unit DISARMED, turn ignition to the ON position.
2. Press and hold the valet/program switch for 2 seconds or until the
LED turns on. The LED will remain on and solid for as long as the system
is in Valet Mode.
To Exit Valet Mode:
1. Returning to normal operation, turn ignition switch to the ON position.
2. Press and hold the valet/program switch for 2 seconds. The LED will
turn OFF indicating the system is out of Valet Mode.
Remote Valet: ( Disarm or Valet mode) Remote Remote
Press and release the
button on the trans- Door Lock Door Unlock
mitter three times within 3 seconds to
enter or exit valet mode. [1] parking light
flash will confirm you have entered Valet
Mode and [2]parking light flashes will
confirm you have exited Valet Mode.
Remote Transmission In-Range Indicator
You are transmitting the signal The system is within the
to the control unit. remote control range.
Door Open Warning Trunk/Hood Trigger
Doors are opened. Trunk or Hood is opened.
(Zone 3) (Zone 2)
Shock Sensor Trigger Warn Away Trigger
Trigger on Shock Sensor Trigger on Shock Sensor
(Zone 4) (Zone 1)
Time Monitor Alert Alarm
You have set morning call
alarm.
Count Down (Parking) Timer Power Save Mode
Reminder when your time is Save the battery power.
up for parking. system is triggered.
Vibration Mode Button Lock
Remote vibrates when the Disable the transmission
system is triggered. function temporarily.
Driver Paging Low Battery
Someone is paging you in front Your must replace the battery
of your vehicle. in the remote control.
LCD REMOTE CONTROL TRANSCEIVER