Filter
Top Products
Galaxy 5000/2000RS-DBP - Page 9
Button 1
Button 2
Button 3
Button 4
Button 5
11/16 3:10P
Battery
status
wakeup
alarm
enabled
autostart
enabled
date/engine run timer
time
Optional 2-way Color remote transmitter is offering increased range and confirmation of any activated
feature.
Page 1
Button 1
Arms and Locks* the system and when held for 3 seconds, activates the system’s Panic feature.
Button 1 also locks the doors when the system is in Valet Mode.
Button 2
Disarms and Unlocks* the system. Pressing Button 2 again operates the Passenger Unlock feature
(if installed).
Button 2
also unlocks the doors when the system is in Valet Mode.
Button 3
Activates the Auxiliary 1 output normally used for trunk release (note trunk icon on button).
Button 4
Activates the Remote Start feature.
Button 5
is the Confirmation, Programming and the Page Shift button. Quickly pressing button 5 will activate
the Page 2 function. Pressing button 5 for 2 seconds activates the system’s confirmation feature which
will then display the current status of the system (armed, disarmed, engine running, etc.).
Page 2
Button 1
Silently Arms*/Locks the system. ( * press and release button 5 then press button 1)
Button 2
Silently Disarms*/Unlocks the system. ( * press and release button 5 then press button 2)
Button 3
Activates the Auxiliary 2 output. ( * press and release button 5 then press button 3)
Button 4
Aux 3 or Factory Rearm output. ( * press and release button 5 then press button 4)
Button 5
not used
Page 3 & 4 are used as Page 1 & 2 for second car operation
System Confirmation
The 2-way transmitter's confirmation feature allows the current vehicle status to be displayed at any time.
To display system status:
1. Press and hold Button 5 until the display shows CONFIRM.
· The transmitter will beep once.
2. Release Button 5.
· The transmitter will beep once.
· The panel will display the current system status.
O
O
P
P
t
t
i
i
o
o
n
n
a
a
l
l
C
C
o
o
l
l
o
o
r
r
R
R
e
e
m
m
o
o
t
t
e
e