Filter
Top Products
101
F. Clipless (“step-in”) pedals
Clipless pedals (sometimes called “step-in pedals”) are the means most racers use to keep their feet securely in the correct position for
maximum pedaling efficiency. They work like ski bindings ... a plate on the sole of the shoe clicks into a spring-loaded fixture on the
pedal. Clipless pedals require shoes specifically designed for the make and model pedal being used. Many clipless pedals are designed
to allow the rider to adjust the amount of force needed to engage or dis-engage the foot. Your dealer can show you how to make this
adjustment.
WARNING: Clipless pedals are intended for use with shoes specifically made to fit them and are designed to firmly keep the foot
engaged with the pedal. Practice is required to learn to engage and disengage the foot safely. Until engaging and disengaging the foot
becomes a reflex action, the technique requires concentration which can distract the rider’s attention, causing the rider to lose control and
fall. Practice engaging and disengaging clipless pedals in a place where there are no obstacles, hazards or traffic; and be sure that you
follow the setup and service instructions and warnings which came with your pedals.
G. Tires and Tubes
1. Tires
Bicycle tires are available in many designs and specifications, ranging from general-purpose designs to tires designed to perform best
under very specific weather or terrain conditions. Your bicycle has been equipped with tires which the bike’s manufacturer felt were the
best balance of performance and value for the use for which the bike was in-tended. If, once you’ve gained experience with your new
bike, you feel that a different tire might better suit your riding needs, your dealer can help you select the most appropriate design.
The size, pressure rating, and on some high-performance tires the specific recommended use, are marked on the sidewall of the tire. The
part of this information which is most important to you is Tire Pressure.
WARNING: Never inflate a tire beyond the maximum pressure marked on the tire’s sidewall. Exceeding the recommended maximum
pressure may blow the tire off the rim, which could cause damage to the bike and injury to the rider and bystanders. The best way to
inflate a bicycle tire to the correct pressure is with a bicycle pump. Your dealer can help you select an appropriate pump.
CAUTION: Gas station air hoses move a large volume of air very rapidly, and will raise the pressure in your tire very rapidly. To avoid
overinflation when using a gas station air hose, put air into your tire in short, spaced bursts.