Filter
Top Products
Headlamps
The band on the lever on the outboard side of the
steering column operates the exterior lamps.
The exterior lamp control has the following
four positions:
2 (Headlamps): Turn the band to this position to turn
on the headlamps, parking lamps, and taillamps.
; (Parking Lamps): Turn the band to this position to
turn on the parking lamps and taillamps only.
AUTO (Automatic Headlamp System): Turn the band
to this position to automatically turn on the Daytime
Running Lamps during daytime, and the headlamps,
parking lamps, and taillamps at night.
P (Off/On): Turn the band to this position to turn
on the Automatic Headlamp System. In Canada, this
position only works when a vehicle is in the PARK (P)
position.
To turn on the Automatic Headlamp System, turn the
switch to off/on. To turn them off, turn the switch to off/on
again. This is a momentary control switch that springs
back when released. The Automatic Headlamp System
always turns on at the beginning of an ignition cycle.
3-13