Filter
Top Products
UNLOCK: Press this button on the remote keyless
entry transmitter to unlock the driver’s door. This also
disarms the theft-deterrent system. See “Theft-Deterrent
System” following for information on disarming the
theft-deterrent system. Press the button again within
5 seconds to unlock the rest of the doors.
L(Panic Alarm): Press the button with the horn
symbol when the ignition is turned off. The horn
will sound and the parking lamps and dome lamp will
flash for up to two minutes. To stop the panic alarm,
press this button again.
V (Trunk): Press this button to open the trunk or
liftgate. The trunk or liftgate will not open when this
button is pressed if the vehicle is moving.
Theft-Deterrent System
The remote keyless entry transmitter is used to
arm/disarm the theft-deterrent system. Your vehicle’s
theft-deterrent system can be programmed to three
different modes.
Active Arming: The system will arm when the lock
button on the remote keyless entry transmitter is
pressed. The system will disarm when the unlock button
is pressed.
Passive Arming: The system will arm itself one minute
after the ignition is turned off and the driver’s door
has been opened and closed. If the lock button on the
transmitter is pressed before the minute has passed, the
system will arm immediately. The system will disarm
when the unlock button is pressed.
Security System Disable: The system will not arm.
To change the mode that your vehicle is programmed to,
do the following:
1. Turn the ignition to RUN or ACC.
2. Press the panic alarm button on the transmitter
slowly four times within five seconds.
3. You must complete one of the following within three
seconds to change the mode.
• To select the active arming mode, press the lock
button on the transmitter.
• To select the passive arming mode, press the
trunk release button on the transmitter.
• To select the security system disable mode,
press the unlock button on the transmitter.
2-6