Removing the Cargo Cover
To remove the cargo shade:
1. Unhook the shade and allow it to retract all the way.
2. Grasp the shade on the driver’s side of the vehicle
and move it toward the passenger’s side,
compressing the spring.
3. Lift up the end of the shade on the driver’s side of
the vehicle and remove the cargo shade from the
vehicle.
{CAUTION:
An improperly stored cargo shade could be
thrown about the vehicle during a collision or
sudden maneuver. You or others could be
injured. If you remove the shade, always store
it outside of the vehicle. When you put it back,
always be sure that it is securely installed.
Installing the Cargo Shade
To install the cargo shade:
1. Insert one end of the shade into the slot on the
passenger’s side of the vehicle.
2. Move the shade toward the passenger’s side to
compress the spring, and lower the shade into
the slot on the driver’s side of the vehicle.
After you’ve installed the cargo shade, check to make
sure it’s secure by trying to lift the shade up without
moving it toward the driver’s or passenger’s side. If you
can lift the cargo shade up, it isn’t secure.
2-44