Filter
Top Products
12
Note: If calibration is performed correctly, loud static and a
single beep will be heard from the speaker. This indicates
that the calibration was successful. If calibration is
unsuccessful, the speaker beeps constantly. If this occurs,
repeat steps.
3UHFDXWLRQV
• Never move the speaker and the microphone after
calibration. If you move them, and must be repeated.
Repeat as necessary over time.
Operating the Hands-free Car Kit
The Hands-free Car Kit provides you with unlimited
talk time while power is supplied from your vehicle, and
allows you to have a conversation without holding the
phone.
$WWDFKLQJWKHSKRQHWRWKHFUDGOH
To place the phone in the cradle:
1. Press and hold the side tabs on the side of your
cradle.
2. Insert the lower end of your phone.
3. Push the upper part of your phone into the cradle
until it snaps into place.
• “HFREE” appears momentarily on the display.
• The phone will automatically power up if it was off.
3
1
2
I300handsfree.book Page 12 Wednesday, October 24, 2001 10:22 AM