Filter
Top Products
243Car care
Dome light, Convertible
1 Pull down the rear edge of the light
fitting.
2 If the center bulb needs replacing, open
the hatch over the bulbs. Pull the bulb
out of the bulb holder.
If one of the outer bulbs needs replacing,
turn the light fitting round. Change the
bulb from the reverse of the lighting
fitting. The bulb has a bayonet fitting.
3 Position the front edge of the light fitting
and press the fitting up towards the
windscreen rail.
Hatch opened for replacement of centre
bulb
Reverse side of the light fitting. The
arrows mark the outer bulbs
93U SM 06.book Page 243 Friday, February 18, 2005 1:15 PM