Filter
Top Products
20 Safety
Child restraints with a tether strap must be
anchored according to Canadian law.
If you have any questions regarding child
tether anchorages please contact your
Saab dealer.
Design 1 (9-5 Wagon only):
1 Place the child restraint in the rear seat.
2 Raise the head restraint to its upper
position and than route the tether under
the head restraint.
3 Attach the tether to the anchorage.
Design 2 (9-5 Wagon only):
All three child anchorages are installed at
factory.
1 Fold the backrest of the rear seat for-
ward, see page 119.
2 Fold the appropriate anchor to upright
position.
3 Place the child restraint in the rear seat.
4 Raise the head restraint to its upper
position and than route the tether under
the head restraint.
5 Attach the tether to the anchor.
6 Raise the backrest of the rear seat.
Make sure it locks properly.
WARNING
Make sure the child-restraint anchorages
are folded all the way up or down other-
wise it can obstruct locking the rear seat
backrest.
IB1266
Child tether anchorages, Saab 9-5
Wagon. Design 1
IB1352
Child tether anchorages, Saab 9-5
Wagon. Design 2