Filter
Top Products
17
How to test RFG-1000(PC version only)
1. Once you start RoyalTek RFG Monitor, the RoyalTek GPS Driver will be
activated automatically.
2. To execute RoyalTek RFG Monitor, please Go to Start
up>Program>Royaltek>RFG-1000>RoyalTek RFG Monitor by double clicking
the RoyalTek RFG Monitor.
3. Please choose the COM port specified by RoyalTek GPS Driver.
The baud rate of the RFG-1000 was defaulted as 4800 bps. RFG-1000
only work at the StrongArm CPU Pocket PC, so if your Pocket PC
CPU is not this type then RFG-1000 cannot be activated.
4. If everything is OK, it will show the position information and satellite’s
constellation.
5. If you want to cold start the GPS receiver, select “Cold Start” from the “Function”
menu and click “Action” icon, the system will clear the RFG-1000 module data and
initialize a cold start on GPS receiver.
“Function” scroll bar:
5) About: Display the version of driver
6) Cold start: Initialize a cold start
7) Warm start: Initialize a warm start
8) Hot start: Initialize a hot start.