Filter
Top Products
ASSEMBLY
RC456 02/11 Assembly Section 3-2
© 2011 Alamo Group Inc.
ASSEMBLY
GENERAL INSTRUCTIONS
Assembly must be done carefully and accurately, for the safety of the person(s) doing the assembling and to
ensure proper machine operation.
Assembly should be done on a flat, solid surface, using the proper tools and wearing suitable clothing, making
sure that all people not involved in the assembly be kept at a safe distance.
Assemblers must provide suitable lifting mechanisms and supports for stabilizing the partially assembled units,
so as to prevent them from falling and causing damage or injury.
The steps for assembly are illustrated in following. Depending on the experience of the assemblers and the
tools available, it is not necessary that the instructions be followed in the exact order given here, but the safety
precautions described above must always be followed carefully and scrupulously.
Before beginning operations, read the instruction manual carefully.
Before doing any maintenance or repair work, stop the machine at a suitable spot. Turn off
the tractor engine, apply the brake, remove the key from the ignition and consult this
manual.
This is a warning to use proper accident protection when carrying out maintenance and
repairs.
Indicates an impending dangerous situation which, if not avoided, will cause death or
severe personal injury.
Indicates a potentially dangerous situation which, if not avoided, could cause death or
severe personal injury, including dangers which are present when protection is removed.
Indicates a potentially dangerous situation which, if not avoided, can provoke less severe or
minor injuries.