Filter
Top Products
❏ 2G. Circuit breaker. The circuit breaker (next to charger input
port in Figure 7a) will automatically shut off the power to the motor in
the event an overload condition is placed on the motor. An excessive
overload, such as too heavy a driver or too steep a hill, could cause the
motor to overheat. If the Ground Force suddenly stops running, wait a
few seconds and then push breaker to reset the circuit. Avoid whatever
conditions caused the breaker to trip and avoid repeatedly tripping the
breaker.
CAUTION: This product moves when used. Exercise caution and common
sense when riding.
NOTE: Tires and drive belt are subject to normal wear and tear. It is
the responsiblity of the user to periodically inspect the tires for excess
wear.
Check out the Razor website: www.razor.com for updates on the latest
maintenance, repair and trouble-shooting procedures.
3. SAFETY CHECK BEFORE DRIVING
❏
Loose parts.
There should not be any unusual rattles or sounds from loose parts or
broken components. If you are not sure, ask an experienced mechanic
to check.
❏
Brake.
Check the brake for proper function. When you squeeze the lever, the
brake should provide positive braking action.
❏
Frame and steering wheel.
Check for cracks or broken connections. Although broken frames are
rare, it is possible for an aggressive driver to bash into a curb or wall
and wreck and bend or break a frame. Get in the habit of inspecting
your regularly.
4. MAINTENANCE AND REPAIRS