Razor 300001-SL Automobile User Manual


 
Figure 6a Figure 6b
WARNING: Practice in an open area free from obstacles until you are famil-
iar with the brake function. Avoid skidding to a stop as this can cause you to
lose control as well as cause damage in the rear tires.
2F. Charging the battery prior to use. Your Ground Force
may not have a fully charged battery at the time of purchase. Therefore
it is a good idea to charge the battery prior to use. The charging input,
on/off switch and overload breaker are located on top of the battery/mo-
tor cover. Plug in the charger as shown in Figure 7a and connect to a
household wall outlet.
The charger has a small window with a LED to indicate the charge
status (Figure 7b). Refer to the illustration on the charger unit for the
actual “charging” and “charged” status indications for your model char-
ger. The initial charge may take from a few minutes to up to 4 hours or
more depending on the level of depletion. If your charger does not look
exactly like the one in Figure 7b, your unit has been supplied with an
alternative charger. The specifications and charging procedure would
not change, however.
Figure 7a Figure 7b
If the adjuster at the lever is threaded outward and the brake still has
too much slack, use the auxiliary adjuster at the rear brake for additional
adjustment (shown in Figure 6b).