Filter
Top Products
22 ST6002 SmartPilot Controller Operating Guide
Can I display Waypoint names?
If waypoints have been given names, the SmartPilot controller will display them
on the Cross Track Error (XTE), Bearing To Waypoint (BTW) and Distance To
Waypoint (DTW) data pages:
• waypoint names of five characters or less are displayed together with the
page name (as shown by screen A below).
• waypoint names of more than five characters alternate with the page name
(as shown by screen B below).
• if the waypoint name has more than nine characters, the display only shows
the first nine characters.
Warning messages
Shallow warning (SHALLOW)
The SmartPilot shows the Shallow warning if it receives a shallow depth message
from an instrument on the SeaTalk system. Press standby or disp to cancel the
warning.
Man Overboard warning (MOB)
The SmartPilot activates the Man Overboard warning if it receives a man
overboard (MOB) message from another instrument on the SeaTalk system. It
displays the text MOB instead of the waypoint number for the XTE, DTW and
BTW data pages.
2.4 User Calibration Options
The calibration information in this handbook relates to only those settings that
can be adjusted during normal operation (USER CAL). For information on all
available calibration settings, see
SmartPilot Commissioning Guide.
Note:
Many of the settings are sailboat specific and will only be displayed if your vessel
type is set to
SAILBOAT.
D8561-1
A
B
TRUE TRUE
TRUE
81269_1.book Page 22 Wednesday, November 9, 2005 2:35 PM