Filter
Top Products
3
Installation
Mounting
As the NMEA Multiplexer is not waterproof, it must be fitted in a
location where it will not come into contact with water.
Secure the NMEA Multiplexer to a suitable surface, as shown in
the following illustration.
D7556-1
Data
O
verflow
NMEA-0183 Multiplexer
D
ata
O
verflow
NMEA-0183 Multi
plex
er
1.
2.
4.
3.
Place the NMEA Multiplexer at
the intended location and mark
holes for fixing screws.
Drill two 1/8"(3.4 mm) pilot
holes for NMEA Multiplexer
screws.
Secure the NMEA
Multiplexer with the
screws provided.
Countersink pilot holes to
prevent damage to the
mounting surface.