Filter
Top Products
16
Operation
• It is being used in a different location.
• The magnetic distortion flag,
DISTORT
is continuously dis-
played.
Follow these steps to calibrate your detector.
1. Press
CITY
for more than 2 seconds until the voice says
“Please turn your vehicle twice,” and
CAL....
appears;
then
TURN
and
TWICE
flash alternately.
2. With the detector mounted in your vehicle, turn the steering
wheel all the way to the right or left and continue driving in
a circular motion. Then press
CITY
.
3. After
WAIT
flashes 4 times, if the calibration is complete,
SUCCESS!
appears and the voice says “Calibration com-
plete.”
4. If calibration is incomplete, the display scrolls
PLEASE
CALIBRATE
AGAIN...PRESS
CITY-KEY
and the
voice says “Please calibrate again.”
After calibration, the heading appears.
Note:
To achieve calibration, two circles must be made and it
must be performed on a level surface in less than 2 minutes.