12
Connecting Power
2. Attach the stand to the bottom of the detector.
3. Remove the tape's paper backing and stick the tape to the
bottom of stand.
Remove the paper backing from the other side of the tape
and press your detector onto the dashboard.
ˆ
Connecting Power
Caution
:
• Use only the supplied power cord. If your power cord is lost
or damaged, you can order a replacement cord from your
local RadioShack store.
• Before plugging the power cord's cigarette-lighter plug into
your vehicle's cigarette-lighter socket, make sure the plug's
tip is screwed firmly onto the plug. See “Replacing the
Fuse” on Page 26 for more information about the cigarette-
lighter plug.
Stand
Tape
Bottom of Detector