11
Installation
1. Clean the selected windshield area, position the bracket on
the windshield, and press firmly on each suction cup to
secure it in place.
2. Slide the detector onto the base plate until it snaps into
place.
To adjust the mounting angle, remove the detector from the
bracket. Then, remove the bracket from the windshield and
adjust it by carefully bending it.
HOOK-AND-LOOP MOUNTING
In some vehicles, the dashboard may be the best location to
mount the detector. For this mounting, use the supplied hook-
and-loop tape as follows:
1. Use a damp cloth to clean the bottom of the stand and the
dashboard. Let both surfaces dry.
Note:
The tape's adhesive might not stick to a surface
treated with vinyl cleaner or protectant.