Filter
Top Products
19
For radar signal detection
,
if the sig-
nal strength number goes higher
than
3, the voice alert says, “X-
band detected,” “K-band detected,”
or “Ka-band detected,” respectively.
When your detector senses a safety alert signal
, SA ap-
pears on the display;
E (emergency band), h (road haz-
ard alert), or
r (railroad warning) flashes on the single
digit display; and the corresponding voice alert says,
“Caution, emergency vehicle,” “Caution, road hazard,” or
“Caution, moving train” depending on the type of signal
received.
When VG-2 is detected
,
VG-2 appears on the dis-
play; the VG-2 alert tone
sounds; and the voice alert
says, “VG-2 detected.”
X
SA
VG-2
22-1692.FM Page 19 Wednesday, September 11, 2002 8:35 AM