Filter
Top Products
11
HOOK-AND-LOOP MOUNTING
In some vehicles, the dashboard may be
the best location to mount the detector.
For this mounting, use the supplied hook-
and-loop tape. Follow these steps to use
the hook-and-loop tape.
1. Use a damp cloth to clean the bottom of the detector
and the dashboard. Let both surfaces dry.
Note:
The tape’s adhesive might not stick to a sur-
face treated with vinyl cleaner or protectant.
2. Remove the tape’s backing and stick the tape to the
bottom of the detector.
Note:
Do not place the
hook-and-loop tape over the
detector’s serial number.
On a curved dashboard, cut
the supplied strip in half and
use one strip on each side of
the bottom of the detector.
Remove the backing from
the other side of the tape
and press the detector onto
the dashboard.
V
O
L
U
M
E
/O
F
F
Place the tape on
the bottom of the
detector
22-1692.FM Page 11 Wednesday, September 11, 2002 8:35 AM