Filter
Top Products
Getting to Know Your GTO
6
Power Seat Adjustments
• The power front seat controls are
located on the outboard side of the
driver and passenger seats. The
horizontal switch is used to adjust the
height, the tilt and the movement of
the seat forward and backward. The
vertical switch is used to adjust the
angle of the seatback.
• Adjust the manual lumbar control to
the desired amount of support in the
lower seatback by turning the knob on
the outboard side of the seat cushion.
• To adjust the height of the head
restraints, pull the head restraint up.
To reduce its height, push in the
locking clip at the base of the head
restraint and push the restraint down.
Front and rear head restraints are
height adjustable.
See Section 1 of your Owner Manual.
Rear Seat Access
Folding the Front Seatbacks Forward:
The front seatbacks fold forward and the
seats slide forward to allow access to
the rear seats.
• To fold the seatback: Lift the entry
lever, located near the top of the
outboard shoulder of each front seat,
and tilt the seatback forward.
• To slide the seat forward: With
the seatback tilted forward, press
and hold the round button located
immediately below the lever.
Returning the Front Seatbacks:
• Ensuring that no objects are behind
the seat, tilt the seatback rearward
until the seatback latches upright.
• Press and hold the button under the
front-seat lever to return the seat to
its original position; the seat will
pause for two seconds when it
reaches its original position.
See Section 1 of your Owner Manual.
Tilt and Telescope Wheel